导航
Language

中文版

English

Focus on environmentally friendly materials for nearly 20 years
Serve each customer with care and satisfy customers
Your position:
Homepage
/
News
/
Industry information
/
Cleaning the trilogy of the activated carbon filter element

Cleaning the trilogy of the activated carbon filter element

(Summary description)The activated carbon filter element needs to be cleaned after being used for a period of time. There is no doubt that in order to clean the activated carbon filter element as much as possible, we need

Cleaning the trilogy of the activated carbon filter element

(Summary description)The activated carbon filter element needs to be cleaned after being used for a period of time. There is no doubt that in order to clean the activated carbon filter element as much as possible, we need

Information
The activated carbon filter element needs to be cleaned after being used for a period of time. There is no doubt that in order to clean the activated carbon filter element as much as possible, we need to carry out three steps. For the activated carbon filter element, These three steps are necessary. For ourselves, these three steps are also very important. Otherwise, it is a white wash. I believe that someone can't wait to know the specific steps, so Xiaobian does not sell off.
 
First, regular cleaning
 
The conventional cleaning method of the activated carbon filter element is to rinse with water, and the dust on the surface of the activated carbon filter element can be washed away. Generally, people use this method to clean the activated carbon filter element. However, users need to pay attention to the material of the activated carbon filter element when cleaning. Not all materials of the activated carbon filter element can be cleaned with water.
 
Second, internal cleaning
 
Internal cleaning is the second step in cleaning. The activated carbon filter element should first be removed and then cleaned against the internal components. Many people think that the inside of the activated carbon filter element does not need to be cleaned. In fact, the dust in the air is not perforated, and the inside of the activated carbon filter element will accumulate a certain amount of dust. Therefore, when cleaning the activated carbon filter element, users must pay attention to internal cleaning.
 
Third, replace the filter
 
The filter element is an important part of the activated carbon filter element. When cleaning the activated carbon filter element, do not neglect the cleaning of the filter element. Filter cleaning requires a lot of attention to detail. Once neglected, it will cause damage to the filter element, and also pay attention to check whether the filter element has been damaged. If the filter element of the activated carbon filter element has been damaged, it must be replaced in time to ensure that the equipment can work normally.
 
The introduction of the cleaning method of the activated carbon filter element is almost finished here. You should not be lazy during the cleaning process.

Scan the QR code to read on your phone

Previous: Activated carbon filter cartridges bring us the gospel
Next: Reasons for the preferred activated carbon filter element for industrial plants to treat waste gas
Previous: Activated carbon filter cartridges bring us the gospel
Next: Reasons for the preferred activated carbon filter element for industrial plants to treat waste gas
imgboxbg

Mobile version

imgboxbg

The public

Tel：86-513-85922725 / 86-513-85924148 / 86-513-85922002

Fax：86-513-85920873

Contacts：Mr.Feng(86-15190828099)  Mr.Gu(86-15365550875)

E-mail：ntsyhb@163.com

Address：No. 196, Renmin Middle Road, Nantong

Copyright ©  2021  Nantong Sanyou Environmental Protection Technology Co., Ltd.    苏ICP备13007877号

Sanyou